Table of Contents
Advertisement
Assembly
5. Mounting the rear cover and wiring cord cover
Caution
Mount the rear cover and wiring cord cover in such a way
that the wires will not be pinched.
1. Raise the rear cover
the left and right of the metal frame, and
push it in until it will go no further.
2. Align the dowels on the wiring cord cover
with the dowel holes at the rear of the light
shield, insert the dowels into the holes, and
secure the cover to the light shield using the
wiring cord cover mounting screws
6. Mounting the support covers
1. Align the support covers
and 1 at the right) with the back surfaces of
the supports, and secure the covers to the
supports using the support cover mounting
screws
(2 at the left and 2 at the right).
● If the screw holes cannot be identified easily, move
the support cover to the left or right, and adjust.
22
slightly, align it with
(x4).
Wiring cord cover
Dowel hole
Dowel
Wiring cord cover mounting
screws (M5×55)
(1 at the left
Support covers
Rear cover
Support cover mounting
screw (M5×35)
Advertisement
Table of Contents
