Table of Contents
Advertisement
3. Use the perpendicularity adjustment triangle
to adjust the supports so that they are
perpendicular to the metal frame, and secure
the supports using the support mounting
hexagon bolts
(4 sets at the left and 4 sets
at the right) in the numerical order shown in
the illustration.
4. Mount the boards
and 1 at the right) on the metal frame, and
secure them using the board mounting
screws
(2 at the left and 2 at the right).
This completes the assembly of the frame part.
Note
The following parts which have so far remained unused will be used to assemble the front cover and rear cover.
• Display mounting hexagon bolts (4 sets)
• Ground plates
• Anchor brackets
Support
mounting
hexagon bolts
(M8×80)
Triangle
(wooden; 1 at the left
(2 pcs)
(4 pcs)
3
2
4
1
Board mounting screws (M5×25)
Boards (wooden)
Supports
19
Advertisement
Table of Contents
