Single Slot Usb Cradle; Charging The Mobile Computer Battery - Symbol MC50 User Manual

Single Slot USB Cradle

This section describes how to use a Single Slot USB cradle with the mobile computer. For USB communication setup procedures refer
to the MC50 Integrator Guide.
The Single Slot USB Cradle:
• Provides 5.4 VDC power for operating the mobile computer.
• Synchronizes information between the mobile computer and a host computer. (With customized or third party software, it
can also synchronize the mobile computer with corporate databases.) Refer to the MC50 Integrator Guide for information on
setting up a partnership between the mobile computer and a host computer.
• Charges the mobile computer's battery.
• Charges a spare battery.
Use only a Symbol-approved power supply (p/n 50-14000-147) output rated 5.4 Vdc and minimum 3A. The
power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any
approval given to this device and may be dangerous.
Hinweis: Benutzen Sie nur eine von Symbol Technologies genehmigte Stromversorgung (Teilenr. 50-14000-
147) mit einer Ausgangsleistung von 5.4 V (Gleichstrom) und mindestens 3A. Die Stromversorgung ist nach
EN60950 für die Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen Netzteils
werden alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb kann gefährlich
sein.

Charging the Mobile Computer Battery

Connect the cradle to power, or to the host computer using the USB connection. Insert the mobile computer into the mobile computer
slot to begin charging.
Figure 3-3. Mobile Computer Battery Charging
Battery Charging LED
Accessories 3-5