Update Printer Firmware, Upload Files To Printer Memory - Printek VehiclePro 420 Operator's Manual

Upload File
Select the graphics file to load into printer memory. Acceptable graphics formats are .jpeg, .pbm, .pcx,
.bmp, .png and .svg.
Set Width
Select the width you want to use to display your logo: full width, half width, or small width.
Set index
Depending on the Index value used, you can automatically print the graphics file as a header (prints at
the beginning of the print job), footer (prints at the end of a print job) or use the graphics print command to
print anywhere on your receipt or label. See Integrator's Guide for more information on graphics
commands.
When selecting header, the graphics file will automatically print the logo at the beginning of each print job.
When selecting footer, the graphics file will automatically print the logo at the end of each print job.
You must set each of these values before selecting Upload Logo or the default values will be associated
with your image.
Current Logo Mapping
Once uploaded into the printer memory, your image and settings will be displayed here.
F. Update Printer Firmware, Upload Files to Printer Memory
Printer Application Updates, OEM information and Manuals and more can be uploaded here. Contact
Printek Technical Support at (800) 368-4636 for more information.
20 www.printek.com | P: 800.368.4636 | F: 269.925.8539 | E: info@printek.com