Led Indicators Of Model M4500-48Xf8C - NETGEAR M4500 Series Hardware Installation Manual

LED indicators of model M4500-48XF8C

System LEDs
LED
PSU1 LED
PSU2 LED
(Power Supply Unit
LEDs, bicolor: green
and red)
FAN LED
(bicolor: green and
red)
SYS LED
(System LED, bicolor:
green and amber)
PWR LED
(Power LED, single
color: green)
BMC LED
(Baseboard
Management
Controller LED,
bicolor: blue and
amber)
State
LED number One per switch on the front panel
Off The switch is nonoperational
Red (Solid) One of the PSUs is operating abnormally
Green (Solid) Both PSUs are operating normally
LED number One per switch on the front panel
Red (Solid) One of the fans is operating abnormally
Green (Solid) All fans are operating normally
LED number One per switch on the front panel
Off The switch is nonoperational
Amber (Solid) The switch is booting
Amber (Blinking) An equipment even occurred
Green (Solid) The switch has loaded the agent software code
and is operating normally
Green (Blinking) The switch is loading the agent software code
LED number One per switch on the front panel
Off The switch is nonoperational or a power failure
occurred
Green (Solid) Power is provided to the switch
LED number One per switch on the front panel
Off The switch is nonoperational
Blue (Slow The BMC is operating normally
Blinking)
Blue (Fast A "show switch location" occurred via the BMC
Blinking)
Green (Solid) The switch has loaded the agent software code
and is operating normally
Green (Blinking) The switch is loading the agent software code
NETGEAR M4500 Series Switches Hardware Installation Guide 8
Model M4500-48XF8C
Description