Table of Contents
Advertisement
Quick Links
Owner's Manual
DVD Recorder
If you need additional operating assistance after reading this owner's manual or
or visit our web site at http://www.SylvaniaConsumerElectronics.com
Connection to a TV
(Before you use this unit, you need to complete connections.)
If your TV has AUDIO/VIDEO input jacks, see the section "Connections" on pages 13–15. If not, it is still possible to connect
this unit to your TV by using a Stereo Audio/Video RF modulator. In this case, follow the instructions below.
1) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then
connect the RF cable to the ANTENNA IN jack of this unit.
2) Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked "ANT IN") by the RF cable.
3) Connect your RF modulator to your TV by another RF cable.
4) Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by Audio/Video
cables.
5) Set your RF modulator's channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your
RF modulator has a Modulator/Antenna switch, set it according to your RF modulator's manual.
6) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch to.
For more details, follow the instructions supplied with the RF modulator.
Antenna
Cable
TV signal
1
To record a program easily, refer to "Easy DVD recording" on pages 16-17 after con-
nections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
Please read before using this equipment.
to order replacement accessories, please call
TOLL FREE : 1-800-605-8453
(Back of This Unit)
COMPONENT
VIDEO IN
VIDEO OUTPUT
IN
S-VIDEO
Y
IN
OUT
L
OUT
P
/C
B
B
R
ANTENNA
P
/C
AUDIO IN
R
R
AUDIO OUT
(L1)
2
5
RF cable
Set channel 3 or 4.
(supplied)
AC 120V
ANT IN
CHANNEL
TO TV
3
4
STEREO AUDIO/VIDEO
RF Modulator
(commercially available)
DVR90DG
4
VIDEO OUT
Audio/Video cables
L
(supplied)
R
AUDIO IN
VIDEO IN
R
L
Antenna in jack
3
RF cable
(commercially available)
OPEN/CLOSE
CHANNEL
REV
FWD
STOP
PLAY
POWER
REC SPEED
REC/OTR
S-VIDEO
VIDEO
L
AUDIO
R
6
Turn on your TV
and select channel
3 or 4.
(Back of TV)
Note
• The quality of
picture may
become poor if this
unit is connected to
an RF modulator.
Advertisement
Table of Contents
Related Manuals for Sylvania DVR90DG
Summary of Contents for Sylvania DVR90DG
-
Page 1: Connection To A Tv
AUDIO OUT (L1) RF cable Set channel 3 or 4. (supplied) AC 120V ANT IN CHANNEL TO TV AUDIO IN VIDEO IN RF cable (commercially available) DVR90DG OPEN/CLOSE CHANNEL STOP PLAY POWER REC SPEED REC/OTR S-VIDEO VIDEO AUDIO Audio/Video cables (supplied) -
Page 2: Before You Start
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Laser Safety This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture- Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. - Page 4 Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields. Avoid the Hazards of Electrical Shock and Fire • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug. • If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry. About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Notice for progressive scan output Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the ‘standard...
- Page 5 Maintenance SERVICING • Please refer to relevant topics on “Troubleshooting” on pages 72-75 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user- serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center. CLEANING THE CABINET • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. CLEANING DISCS • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records. CLEANING THE DISC LENS • If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. DISC HANDLING • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Dolby Digital Recording “Dolby ®...
-
Page 6: Table Of Contents
Before you start ....2 Precautions ....... 2 Table of contents . -
Page 7: Features
This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this unit. Recording This unit is compatible with both DVD-RW, which is rewritable repeatedly and DVD-R, which is available for recording once. You can choose either one for your convenience. Up to 8 program recording: You can program the unit to record up to 8 programs, with in a month in advance. Daily or weekly program recordings are also available. One-touch Timer Recording: You can easily set a recording time as you prefer. Every time [REC/OTR] is pressed during recording, the recording time will be increased by 30 minutes up to 8 hours. The recording automatically stops when the recording time you set is reached. Automatic Chapter marker setting: Chapter markers will be put on recordings as you set in the Setup menu before attempting to record. Automatic Title menu making: The unit makes title menus automatically when final- izing the disc which are recorded in Video mode. Automatic Playlist making (VR mode): A Playlist will be prepared from an Original title, so that you can edit titles in a Playlist as you prefer. -
Page 8: Functional Overview
Front Panel ( * ) The unit can also be turned on by pressing these buttons. Disc tray Place a disc when open. Display Refer to “Front Panel Display Guide” on page 12. OPEN/CLOSE A button* Press to open or close the disc tray. CHANNEL L / K button Press to change the channel up and down. REV E button During playback, press to skip to the previous chap- ter or track. During playback, press and hold for 1.5 seconds to fast reverse. When playback is paused, press repeatedly to slow reverse. FWD D button During playback, press to skip to the next chapter or track. During playback, press and hold for 1.5 seconds to fast forward. When playback is paused, press repeatedly to slow forward. STOP C button Press to stop play or recording. -
Page 9: Remote Control
Functional overview (cont’d) Remote Control POWER .@/: PQRS DISPLAY TOP MENU MENU/LIST REC SPEED x1.3/0.8 REC/OTR ( * ) The unit can also be turned on by pressing these buttons. POWER button Press to turn the unit on and off. If timer programmings have been set, press to set the unit in timer-standby mode. ZOOM button During playback, press to enlarge the picture on the screen. Number buttons Press to select channel numbers. Press to select a title/chapter/ track on display. Or press to enter values for the settings in the Setup menu. DISPLAY button Press to display the On Screen menu on or off. -
Page 10: Installing Batteries In The Remote Control
Functional overview (cont’d) Installing batteries in the remote control Install two “AA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Do not mix new and old batteries together. • Do not use different kinds of batteries together, although they may look similar, different batteries may have different voltages. • Make sure that the plus and minus ends of each battery match the indications in the battery compartment. • Remove batteries from equipment that is not going to be used for a month or more. • When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. • Do not recharge, short-circuit, heat, burn or disassemble batteries. Guide to Displays the On Screen menu This unit uses the following the On Screen menu for most operations: Setup menu, Title list, Playlist, Original and Display menu. They allow you to change the playing status of disc during play. -
Page 11: Setup Menus
Functional overview (cont’d) Setup menus Press [SETUP] to display the Setup menu, then press [ENTER] to display each menu, using These menus provide entries to all main functions of the unit. Setup Required Setting Playback Display Recording Clock Channel Disc 1. Required Setting: To set up the required setting. 2. Playback: To set up the unit to play discs as you prefer. 3. Display: To set up the OSD screen and the front panel display of the unit as you prefer. 4. Recording: To set up the unit to record to discs as you prefer. 5. Clock: To set up the clock of the unit as you need. 6. Channel: To adjust the channel setting of the unit as you prefer. - Page 12 Functional overview (cont’d) Front Panel Display Guide 1. Current Status of the unit :Appears when disc playback is paused. :Appears when playing a disc. :Appears when the timer programming has been set and is proceeding. Flashes when all Timer Recordings have been finished, or when a program cannot be performed by some reason. :Appears during recording process. :Appears during repeat play. Display message Appears when the unit is turned on. Appears when the unit is turned off. Appears when the disc tray is opening. Before you start 2. Disc type :Appears when an Audio CD or a disc with MP3 files is inserted in the...
-
Page 13: Connections
Antenna Cable Cable TV signal TV signal (Back of TV) Disconnect Make one of the following connections, depending on the capabilities of your existing equipment. Basic Audio Audio cable (supplied) This unit VIDEO OUT COMPONENT VIDEO IN VIDEO OUTPUT VIDEO OUT S-VIDEO ANTENNA AUDIO IN COAXIAL AUDIO OUT (L1) AUDIO OUT AUDIO OUT Note • Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. -
Page 14: Connection To A Cable Box Or Satellite Box
Connection to a cable box or satellite box (Cable box or Cable Satellite box) TV signal RF cable Connect With this setup: • You can record any unscrambled channel by selecting the channel on the cable box or satellite box. Be sure that the cable box or satellite box is turned on. • You cannot record one channel while watching another channel. Note to the Cable TV System Installer : This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the... -
Page 15: Connection To An Audio System
Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Method 1 Stereo system AUDIO Audio cable (supplied) This unit Note • Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. Admiral Curtis Mathis LINE1, LINE2, 00, 90, 91, 92, 93 INPUT, TV/VCR, 00, 90, 91, 92, 93 Hitachi INPUT, AUX VIDEO, VIDEO1, VIDEO2, VIDEO3... -
Page 16: Getting Started
The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit and the TV correctly. Step 1: Choose a disc type. There are several types of recordable DVD discs to choose from. Choose a recordable DVD disc type based on your playing/recording/editing require- ments. See “DVD disc types” at the bottom of this page for more information on the differences between the different kinds of compatible media. This unit can record on the following type of discs. (or) For example, when you want to record repeat- edly on the same disc, or when you want to edit the disc after recording, select the rewrita- ble DVD-RW type disc. - Page 17 POWER OPEN/CLOSE TIMER ZOOM PROG. .@/: Step 3: Select the PQRS WXYZ REPEAT recording DISPLAY SPACE CLEAR SETUP speed. T OP MENU MENU/LIST RETURN ENTER REC SPEED SKIP PAUSE SKIP Bx1.3/0.8 REC/OTR STOP CM SKIP 0:58 Hint 1: Play the recorded contents You can select the title you want to play from a displayed menu, and immediately start to play. Recorded contents are easily accessible,...
-
Page 18: Initial Setting
Turn on this unit for the first time, you need to follow these steps. Press [POWER]. Turn the TV on. Select the input to which the unit is connected. Refer to the table on page 15. “Initial Setting” will automatically appear. Using [K / L], select your desired language for the OSD. Then press ENTER to go to next step. Initial Setting English Français Español... -
Page 19: Adding/Deleting Channels
Adding/deleting channels The channels you no longer receive or seldom watch can be deleted from the memory. You also may add channels into memory. Press [SETUP]. Using [K / L], select “Channel”. Press [ENTER]. Channel menu will appear. Using [K / L], select “Manual Preset”. Press [ENTER]. Manual Preset menu will appear. Manual Preset Delete Getting started Channel setting (cont’d) Select the channel number to add or delete. -
Page 20: Selecting The Tv Stereo Or Sap
Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. Press [SETUP]. Using [K / L], select “Required Setting”. Press [ENTER]. Required Setting menu will appear. Required Setting Select Video 4:3 Letter Box TV Aspect Stereo TV Audio Select Notes on TV channel audio • When you record a TV program available in second audio or stereo on a DVD-RW/R, you have to select either Stereo or SAP in the Channel Preset screen beforehand. Refer to the following table to check an appropriate setting. Selected Broadcast audio... -
Page 21: Setting The Clock
Set the clock before you try the Timer Recording. If a Public Broadcasting Station (PBS) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 22. Auto Clock Setting Make sure • The antenna/Cable TV connections are correct. • If this unit is connected to a Cable Box or Satellite Box, select the local PBS station on them to set the clock automatically. Press [SETUP]. Using [K / L], select “Clock”. Press [ENTER]. Clock menu will appear. Using [K / L], select “Auto Clock Setting”. Press [ENTER]. Option window will appear. -
Page 22: Manual Clock Setting
Manual Clock Setting Press [SETUP]. Using [K / L], select “Clock”. Press [ENTER]. Using [K / L], select “Clock Setting”. Press [ENTER]. Clock Setting menu will appear. Clock Setting ---- / -- / ---- ( ---- ) -- : ---- Press [ENTER] again. Default date will appear. Getting started Setting the clock (cont’d) Using [K / L], enter the date... -
Page 23: Setting The Daylight Saving Time
Setting the Daylight Saving Time When “Daylight Saving Time” is “ON”, the unit clock will automati- cally move forward one hour at 2:00a.m. on the first Sunday in April and move back one hour at 2:00a.m. on the last Sunday in October. Press [SETUP]. Using [K / L], select “Clock”. Press [ENTER]. Clock menu will appear. Selecting the TV aspect ratio You can select the TV aspect ratio to match the formats of what you are playing with the unit and your TV screen (4:3 standard or 16:9 widescreen TV). “4:3 Letter Box” has been selected as the default. Press [SETUP]. Using [K / L], select “Required Setting”. -
Page 24: Recording
Information on DVD recording Information This unit can record to DVD-R and DVD-RW discs. DVD-R discs can only be recorded once, and cannot be erased. DVD-RW discs can be recorded and erased many times. DVD-R discs can only be recorded in Video mode, while DVD-RW discs can select a recording format between Video mode and VR mode. Logo Attributes 8cm/12cm, single-sided, single layer disc DVD-RW Approx. max. recording time (SEP mode): 600 minutes (4.7GB) (for 12cm) 180 minutes (1.4GB) (for 8cm) DVD-R Recordable disc • Discs that should or should not be used with this recorder: DVD-R 8x can be used, 16x may result in a Rec error. -
Page 25: Restrictions On Recording
Information on DVD recording (cont’d) Restrictions on recording You cannot record copy-protected video using this unit. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on the screen. Video that is “copy-once only” can only be recorded using a DVD-RW disc in VR mode with CPRM (see below). When recording a TV broadcast or through an external input, you can display copy control information on the screen. What is “CPRM”? CPRM is a copy protection system with scramble system regarding the recording of “copy-once” broadcast programs. CPRM stands for Content Protection for Recordable Media. This unit is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be played on DVD players that are specifically compatible with CPRM. Information on copy control Some satellite broadcasts include copy-protected information. For recording these, refer to the following. -
Page 26: Formatting A Disc
Choosing the recording format of a blank disc Video DVD-RW DVD-RW DVD-RW DVD-RW When inserting a blank disc, the unit automatically starts to initialize the blank disc. You have to select your desired format before insert- ing the blank disc. Press [SETUP]. Using [K / L], select “Disc”. Press [ENTER]. Disc menu will appear. <VR mode> Disc Format Finalize Disc Protect OFF Using [K / L], select “Format”. Press [ENTER]. -
Page 27: Reformatting A Disc
Reformatting a disc Video DVD-RW DVD-RW DVD-RW DVD-RW If you are using a DVD-RW disc, by default it will be Video mode. You can change it to VR mode from the Setup menu. Press [SETUP]. Using [K / L], select “Disc”. Press [ENTER]. Disc menu will appear. Using [K / L], select “Format”. Press [ENTER]. Format menu will appear. Format Start Format Mode Video mode Using [K / L], select “Start”. Press [ENTER]. -
Page 28: Basic Recording
Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R Follow the steps below to record TV programs. Turn on the unit. Load a record- able disc. Make sure that the TV input is set on the unit. This operation may take a while to be recognized. Using [REC SPEED], select a recording speed. 0:58 Refer to “Recording speed” on page 24. Using [CH K / L] or the Number buttons, select a desired chan- nel to record. -
Page 29: One-Touch Timer Recording
One-touch Timer Recording Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby. Turn on the unit and load a recordable disc. Make sure that the TV input is set on the unit. This operation may take a while to be recognized. Using [REC SPEED], select a recording speed. -
Page 30: Timer Recording
Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R You can program the unit to record up to 8 programs within a month in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before setting a timer programming. • Insert a recordable disc. Press [TIMER PROG.]. Timer Programming list will appear. Timer Programming Date Start Speed Using [K / L], select a program number. Press [ENTER]. Using [K / L], enter the Date. Press [B]. - Page 31 Press [ENTER] when information is entered. Your program setting will be stored. • To set another program, repeat steps 2 to 7. • To exit, press [TIMER PROG.] or [SETUP]. • When two or more programs are overlapped, “Overlap” and the overlapped program number will appear in the display. Checking, canceling, or correcting the timer programming information Press [POWER]. indicator disappears from the front panel display. Press [TIMER PROG.]. Timer Programming list will appear. Timer Programming Date Start Speed 1.
-
Page 32: Hints For Timer Recording
Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not on the tray, the indicator flashes and Timer Recording cannot be performed. In some cases, the indicator appears momentarily around the start point as the unit attempts to record. Please insert a recordable disc. • When all the Timer Recording is completed, the indicator flashes. To play or eject the recorded disc, press [POWER] first, and then press [PLAY B] or [OPEN/CLOSE A]. • During the Timer Recording or timer standby ( indicator is on the front panel display), any operations on the unit will not be available. To make these operations available, cancel the Timer Recording or timer standby first ( indicator disappears). • To cancel the timer standby mode, press [POWER]. • When the Start and the End time are the same, the length of the recording will be set for 24 hours. When the disc reaches at the end during the recording, the unit turns itself off. • When the programmed Start and End time are earlier than the current time, the setting will not be accepted and be cleared for redoing. • If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off. The priority of overlapped settings This unit records the programs according to priority if the timer programmings are overlapped. The timer programming set previously has priority. A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary. A programming set previously has priority When the starting time is same: A program set previously (PROG. -
Page 33: Settings For An External Source
Settings for an external source Connection to an external source Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of LINE2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. OUTPUT S- VIDEO VIDEO AUDIO S-Video Video Audio cable cable cable S-VIDEO VIDEO AUDIO To LINE 2 IN 1. Press [SETUP]. 2. -
Page 34: Recording From An External Source
Settings for an external source (cont’d) Recording from an external source Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R Before recording from an external source, see the instructions for the connection on page 33. 1. Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected. Refer to the table on page 15. -
Page 35: Finalizing The Discs
Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R You will need to finalize discs recorded in Video mode to play in other DVD players. Finalizing may take several minutes up to an hour. (A disc recorded in Video mode can take up to 15 minutes. A disc recorded in VR mode can take up to 60 minutes.) A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. Details are on pages 24-25. Press [SETUP]. Using [K / L], select “Disc”. Press [ENTER]. Disc menu will appear. Using [K / L], select “Finalize”. Press [ENTER]. Confirm window will appear. -
Page 36: Auto Finalize
Finalizing the discs (cont’d) Auto finalize Video DVD-RW DVD-RW DVD-R DVD-R You can finalize discs automatically using Auto Finalize function. You can use this function to finalize discs after finishing all Timer Recordings and at the end of the disc space. Press [SETUP]. Using [K / L], select “Recording”. Press [ENTER]. Recording menu will appear. Using [K / L], select “Auto Finalize”. Press [ENTER]. Auto Finalize menu will appear. Auto Finalize Disc Full End of Timer Rec Recording... -
Page 37: Playing Discs
Before you play DVD discs, read the following information. Playable discs This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described followings. Discs that have the following logos will play on the unit. Other Disc types are not guaranteed to play. Disc DVD-VIDEO DVD-RW (VIDEO/VR mode) DVD-R (VIDEO mode) CD-DA (AUDIO CD) CD-RW (CD-DA FORMAT, MP3 files) CD-R (CD-DA FORMAT, MP3 files) is a trademark of DVD Format/Logo Licensing Corporation. Guide to displays Press [DISPLAY] to call up the Display menu. This menu will give you the information on the... -
Page 38: Basic Playback
Playback Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R Press [POWER]. When you are playing a DVD, turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] . The disc tray will open. Insert your disc with its label fac- ing up. Align the disc to the disc tray guide. disc tray guide Press [OPEN/CLOSE A] to close the disc tray. -
Page 39: Playing Mp3 Disc
DVD-V DVD-V DVD-V DVD-V Press [POWER]. When you are playing a DVD, turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open. Insert your disc with its label fac- ing up. Align the disc to the disc tray guide. Playing MP3 disc In stop mode, press [TOP MENU] to call up the MP3 menu. -
Page 40: Playing Discs Using The Disc Menu
Playing discs using the Disc menu DVD-V DVD-V DVD-V DVD-V A DVD disc contains a Disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. Sometimes these are displayed automatically when you start playback, otherwise only appear when you press [MENU / LIST]. Press [MENU / LIST]. The Disc menu will appear. If the feature is not available, may appear on the TV screen. Using [K / L / { / B], select an item. -
Page 41: Special Playback
Resume play Video DVD-RW DVD-V DVD-V DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-R DVD-R You can resume play from where you stopped playing the disc last. During playback, press [STOP C]. The resume message will appear. Resume ON Fast forward / Fast reverse Video DVD-RW DVD-RW DVD-V DVD-V DVD-V DVD-V DVD-RW DVD-RW During playback, press [FWD D] or [REV E]. Every time you press [FWD D] or [REV E], approximate speed will be changed as follows. -
Page 42: Rapid Play
Rapid Play Video DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-V DVD-V DVD-R DVD-R Rapid Play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid Play plays back in a slightly faster/slower speed while keeping the sound quality just as normal playback. During playback, press [Bx1.3/0.8]. Step by step playback Video DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-V... -
Page 43: Zoom
Zoom Video DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-V DVD-V DVD-R DVD-R During playback, press [ZOOM]. Zoom menu will appear. 0:00:00 DVD-Video There are four options (x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate. Marker Setup Video DVD-RW DVD-RW DVD-V DVD-V DVD-V DVD-V DVD-RW DVD-RW DVD-R DVD-R This feature allows you to assign a specific point on a disc to be called back later. During playback, press [DISPLAY]. -
Page 44: Search
Title/Chapter search Video DVD-RW DVD-RW DVD-V DVD-V DVD-V DVD-V DVD-RW DVD-RW Using [SKIP H / G] During playback, press [SKIP G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. To go back to the beginning of the current title or chapter, press [SKIP H]. Press it repeatedly to go to the previous title or chapter. The title or chapter will move backward one title at a time. Using [DISPLAY] During playback, press [DISPLAY]. -
Page 45: Track Search
Track search Using [SKIP H / G] During playback, press [SKIP G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [SKIP H]. Press it repeatedly to go to the previous track. The track will move backward one at a time. Using [DISPLAY] During playback, press [DISPLAY]. The Display menu will appear. <Audio CD> 0:00:00 Audio CD Using [{ / B], select . -
Page 46: Repeat/Random/Program Playback
Repeat/Random/Program playback Repeat play Video DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-V DVD-V DVD-R DVD-R During playback, press [REPEAT]. Repeat menu will appear. <DVD-Video> 0:00:00 DVD-Video Title Chapter A - B <Audio CD> 0:00:00 Audio CD Track <MP3 files> 0:00:00 Track Group Using [K / L], select a desired option to repeat. -
Page 47: Program Play
Repeat/Random/Program playback (cont’d) Program play You can program the disc to play in your desired order. Press [SETUP]. Using [K / L], select “CD Playback Mode”. Press [ENTER]. CD Playback Mode menu will appear. Using [K / L], select “Program Play”. Press [ENTER]. Program Play list will appear. Program Play Total 0:00:00 Selecting the format of audio and video You can select the format of audio and video as you prefer depending on the contents of the disc you are playing. -
Page 48: Switching Audio Soundtrack
Selecting the format of audio and video (cont’d) Switching audio soundtrack DVD-V DVD-V DVD-RW DVD-RW DVD-V DVD-V When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch them during playback. On DVD-RW discs recorded in VR mode, you can switch to main (L), sub audio (R) or a mix of both (L/R). When playing Audio CDs files you can switch between stereo, just the left channel or just the right channel. During playback, press [DISPLAY]. The Display menu will appear. Using [{ / B], select Press [ENTER]. Audio menu will appear. -
Page 49: Switching Camera Angles
Selecting the format of audio and video (cont’d) Using [K / L], select “OFF”, “Type1” or “Type2”. Press [ENTER]. Switching camera angles DVD-V DVD-V DVD-V DVD-V Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes. During playback, press [DISPLAY]. The Display menu will appear. 0:00:00 DVD-Video Angle icon appears when a switching camera angle is available. -
Page 50: Editing
Guide to a title list Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this screen and easily edit the titles as you prefer. Press [TOP MENU]. Original JAN/1 1:00AM CH12 XP Original Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Protect JAN/1 1:00AM CH12 XP 1. Titles recorded on the disc can be selected to edit or play by pressing [ENTER] with the cursor on the title. 2. The key icon, which appears when the title has been protected. (Original titles only) 3. The arrow icon, which means the Title list includes a next or a previous page. Press [{ / B] by following direction of the icon. -
Page 51: Editing Discs In Video Mode
Editing discs in Video mode Deleting titles Video DVD-RW DVD-R DVD-R DVD-RW You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title in the title list in Video mode is deleted, the disc space to record will be increased. For DVD-R disc, the disc space to record will not be changed. Press [TOP MENU]. Title List will appear. Title List JAN/1 1:00AM CH12 XP Using [K / L / { / B], select the desired title. -
Page 52: Putting Names On Titles
Editing discs in Video mode (cont’d) Putting names on titles Video DVD-RW DVD-RW DVD-R DVD-R You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a Title List. Follow the steps 1 to 3 on page 51 to display the Edit menu. Using [K / L], select “Edit Title Name”. Press [ENTER]. A window for entering a title name will appear. Title List - Edit Title Name A B C a b c 1 2 3... -
Page 53: Setting Or Clearing Chapter Markers
Editing discs in Video mode (cont’d) Setting or clearing chapter markers Video DVD-RW DVD-RW You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can set chapter markers at a specified time you selected for titles with more than 5 minutes. Follow the steps 1 to 3 on page 51 to display the Edit menu. Using [K / L], select “Chapter Mark”. Press [ENTER]. Option window will appear. Title List - Chapter Mark 5 minutes 10 minutes 15 minutes 30 minutes... -
Page 54: Editing Discs In Vr Mode (Original)
Editing discs in VR mode (Original) Deleting titles DVD-RW DVD-RW When a title is deleted from an Original list in VR mode, the disc space to record will be increased. Be advised that the titles once deleted cannot be brought back to the disc. Press [TOP MENU], and then press [MENU / LIST] to change “Playlist” to “Original”. Original list will appear. Using [K / L / { / B], select the desired title. -
Page 55: Setting Titles To Protect
Editing discs in VR mode (Original) (cont’d) Setting titles to protect DVD-RW DVD-RW To prevent accidental editing, or erasing the titles, you can protect them from the Original menu. Follow the steps 1 to 3 on page 54 to display the Original menu. Using [K / L]] , select “Protect”. Press [ENTER]. Option window will appear. Original - Protect JAN/1 1:00AM CH12 XP 0:00:59 Confirm the indication “OFF ON”. -
Page 56: Releasing Titles From Protecting
Editing discs in VR mode (Original) (cont’d) Releasing titles from protecting DVD-RW DVD-RW You are allowed to release the titles protecting feature once protected. Follow the steps 1 to 3 on page 54 to display the Original menu. Using [K / L], select “Protect”. Press [ENTER]. Option window will appear. Original - Protect JAN/1 1:00AM CH12 XP 0:00:59 Confirm the indication “ON OFF”. Press [ENTER]. Original - Protect JAN/1 1:00AM CH12 XP Wait for a moment. -
Page 57: Editing Discs In Vr Mode (Playlist)
Editing discs in VR mode (Playlist) Deleting titles DVD-RW DVD-RW In VR mode, even when a title is deleted from a Playlist, the original title will remain in an Original list. The disc space to record will not be increased. Press [TOP MENU] , and then press [MENU / LIST] to change “Original” to “Playlist”. Playlist will appear. Using [K / L / { / B], select the desired title. -
Page 58: Dividing A Title
Editing discs in VR mode (Playlist) (cont’d) Dividing a title DVD-RW DVD-RW You can divide a title into two new titles. Follow the steps 1 to 3 on page 57 to display the Playlist menu. Using [K / L], select “Title Dividing”. Use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to decide the point at which you will divide the title. -
Page 59: Combining Titles
Editing discs in VR mode (Playlist) (cont’d) Combining titles DVD-RW DVD-RW You can combine two titles into a single title. Follow the steps 1 to 3 on page 57 to display the Playlist menu. Using [K / L], select “Title Combining”. Press [ENTER]. Title Combining setting window will appear. Selected title grays out, and the frame of the next title becomes yellow. Playlist - Title Combining JAN/1 1:00AM CH12 XP Using [K / L / s / B], select another title to combine. -
Page 60: Adding Titles To A Playlist
Editing discs in VR mode (Playlist) (cont’d) Adding titles to a Playlist DVD-RW DVD-RW You can add or delete a title in the Playlist as you prefer. You can add titles to a Playlist up to 99. Follow the step 1 on page 57 to display the Playlist. Next to the final title, “Add New Title” “Delete Playlist” menu is shown. Using [K / L], select “Add New Title”. Press [ENTER]. Playlist - Add New Title JAN/1 1:00AM CH12 XP Add New Title Delete... -
Page 61: Editing Discs In Vr Mode (Original / Playlist)
Editing discs in VR mode (Original / Playlist) Deleting parts of titles DVD-RW DVD-RW You can delete a specific part of a title. Even when a title is deleted from the Playlist, the original title will remain. The disc space to record will not be increased. Press [TOP MENU], and then press [MENU LIST] to select “Original” or “Playlist”. Using [K / L / { / B], select the desired title. -
Page 62: Putting Names On Titles
Editing discs in VR mode (Original / Playlist) (cont’d) Putting names on titles DVD-RW DVD-RW You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a Title List. Follow the steps 1 to 3 on page 61 to select “Original” or “Playlist”. Using [K / L], select “Edit Title Name”. -
Page 63: Setting Or Clearing Chapter Markers
Editing discs in VR mode (Original / Playlist) (cont’d) Setting or clearing chapter markers DVD-RW DVD-RW You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the Playlist comes to 999 in total, you cannot add any more chapter markers. Follow the steps 1 to 3 on page 61 to select “Original” or “Playlist”. Using [K / L], select “Chapter Mark”. -
Page 64: Setting Pictures For Thumbnails
Editing discs in VR mode (Original / Playlist) (cont’d) Setting pictures for thumbnails DVD-RW DVD-RW You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default. Follow the steps 1 to 3 on page 61 to select “Original” or “Playlist”. Use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to decide the picture you want to select as a... -
Page 65: Changing The Setup Menu
Changing the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) 1.Language setting Disc Menu Language Pages 66-67 Audio Language Subtitle Language 2.Display setting OSD Language Pages 67-68 Angle Icon Screen Saver FL Dimmer 3.Audio setting Digital Out Pages 68-70 Dynamic Range Control 4.Parental setting Parental Lock Pages 70-71 (Change password) Tour of the Setup menu English French Spanish Original English... -
Page 66: Language Setting
Changing the Setup menu Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [ENTER]. Playback menu will appear. Using [K / L], select “Language”. Press [ENTER]. Language menu will appear. Using [K / L], select a desired item. Press [ENTER]. Disc Menu Language (Default : English) Set the language for Disc Menu. -
Page 67: Display Setting
Changing the Setup menu Subtitle Language (Default : OFF) Set the Subtitle language. Language Disc Menu English Audio Original Subtitle If “Other” is selected, press 4-digit code using the Number buttons. Language - Subtitle Code Input Press [SETUP] to exit. Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Display”. Press [ENTER]. Display menu will appear. -
Page 68: Audio Setting
Changing the Setup menu OSD Language (Default : English) Set the language for OSD. Display OSD Language English Angle Icon Screen Saver 10 minutes FL Dimmer Bright Angle Icon (Default : ON) Set to ON or OFF. Display OSD Language English Angle Icon Screen Saver 10 minutes FL Dimmer Bright Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. - Page 69 Changing the Setup menu Using [K / L], select “Playback”. Press [ENTER]. Playback menu will appear. Using [K / L], select “Audio”. Press [ENTER]. Digital Out Set the digital audio output. Audio Digital Out Dynamic Range Control Settings for PCM (Default : 48kHz) • Using [K / L], select a setting. Press [ENTER]. Digital Out - PCM Your setting will be activated.
-
Page 70: Settings For Parental Lock Level
Changing the Setup menu Dynamic Range Control (Default : ON) Set to ON to compress the range between soft and loud sounds. Audio Digital Out Dynamic Range Conrtol Press [SETUP] to exit. Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [ENTER]. Playback menu will appear. - Page 71 Changing the Setup menu Settings for Parental lock level (cont’d) Parental Lock (Default : All) Set the Parental Lock level. Playback Audio Video Language Parental Lock A password has not been set yet. Parental Lock Change Password? • If you select “No”, proceed to Step 5. A password has been set already. Parental Lock Password Input * * * * •...
-
Page 72: Others
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Power The power does not turn on. Picture There is no picture. Picture noise appears. TV program reception does not fill the screen. TV program pictures are distorted. TV channels cannot be changed. Playback picture is distorted The playback picture or TV program from the equipment connected through the unit is distorted. Sound There is no sound. Sound is noisy. No DTS sound is output. Remote control The remote control does not function. • Batteries are weak. Others Troubleshooting Remedy • Check that the AC power cord is connected securely. • (In case of power failure) Check the breaker. • Re-connect the connecting cords securely. • Check if the connecting cords are damaged. • If Setup Display appears on the TV screen, press [RETURN turn off the display. • Check the connection to your TV (page 13). • Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV (page 13). • Switch the input selector on your TV (such as to “LINE1”) so that the signal from the unit appears on the TV screen. • The disc is dirty or flawed. • If the picture output signal from the unit passes through your VCR to get to your TV, or if you are connected to a combination TV/ VIDEO player, the copy-protection signal applied to some DVD... - Page 73 Symptom Playback The disc does not play. Playback image freezes for a second. The disc does not start playback from the beginning. The unit starts playing from the disc automatically. Some functions such as Stop, Search, or Slow-motion Play cannot be performed. The language for the sound track cannot be changed. The subtitle language cannot be changed or turned off. The angles cannot be changed. Recording/Timer Recording/Editing The channel cannot be changed from the channel you are recording. Recording does not start immediately after you press [REC/OTR]. Nothing was recorded even though you set the timer setting correctly. Recording does not stop immediately after you press [STOP C]. Timer Recording is not complete or did not start from the beginning. Others Troubleshooting (cont’d) Remedy • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play certain discs (such as a CD-ROM) (page 37). • The region code on the DVD-Video does not match the unit (page 37).
- Page 74 Symptom Others The unit does not operate properly. The disc tray does not open when you press [OPEN/CLOSE A]. “Repairing” appears on the display. Repairing In a case you intend to cancel the Repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable. Repairing Error message Disc Error --- Please eject the disc. --- Playback feature may not be available on this Disc. Region Error --- Please eject the disc. --- Playback is not authorized in your region. Parental Lock On The current selected parental level prohibits playback.
-
Page 75: Language Code
Error message Recording Error You cannot record more than 99 titles on one disc. (The maximum is 99) Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) Recording Error You cannot record on this disc as Control Information is full. Recording Error You cannot record on this disc as Power Calibration Area is full. Recording Error This disc is already finalized. * If you are still having trouble with the unit after checking “Troubleshooting”, write down the error code and the error description for calling our help line mentioned on the front page to locate an Authorized Service Center. Language Code Language Abkhazian 4748 French Afar 4747 Frisian Afrikaans 4752 Galician Albanian 6563 Georgian Amharic 4759 German Arabic 4764 Greek Armenian... -
Page 76: Glossary
Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high). Chapter Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters. See also Title. Component video output Each signal of luminance(Y) and component(Pb/Cb, Pr/Cr) is independent to output so that you can experience picture color as it is. Also, due to compatibility with progressive video (525p/480p), you can experience higher-density picture than that in interlace (525i/480i). CPRM (Content Protection for Recordable Media) CPRM is a copy protection system with scramble system regarding the recording of “copy-once”... -
Page 77: Specifications
General System Power requirements Power consumption Weight Dimensions (width x height x depth) Operating temperature Operating humidity TV format Recording Recording format Recordable discs Video recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format Tuner Receivable channels CATV Input / Output VHF/UHF antenna input/output terminal Video input Input level Jacks Video output Output level Jack S-Video input Y (Iuminance) - Input level C (color) - Input level Jacks... -
Page 78: Español
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco. Puede elegir entre distintos tipos de discos DVD grabables. Elija un tipo de disco DVD grabable de acuerdo con sus necesidades de reproducción/ grabación. Vea los “Tipos de discos DVD” en la parte inferior de esta página para más detalles sobre las diferencias entre los distintos medios compatibles. Este grabador de DVD puede grabar los sigu- ientes tipos de discos. Por ejemplo, cuando desea grabar repetida- mente en el mismo disco o cuando desea edi- tar el disco después de grabar, seleccione el disco de tipo regrabable DVD-RW. - Page 79 Fácil grabación de DVD (cont.) POWER OPEN/CLOSE TIMER ZOOM PROG. .@/: Paso 3:Seleccione la PQRS WXYZ REPEAT velocidad de DISPLAY SPACE CLEAR SETUP grabación. T OP MENU MENU/LIST RETURN ENTER REC SPEED SKIP PAUSE SKIP Bx1.3/0.8 REC/OTR STOP CM SKIP 0:58 Sugerencia 1: Reproduzca el contenido grabado Puede seleccionar el título que desea...
- Page 80 FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. LIMITS AND EXCLUSIONS: This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States.
-
Page 81: Dvd Playback
Video mode Playing, limited recording, limited editing DVD-R DVD-R DVD-R: 2x.4x.8x DVD Recorder DVD Recorder DVR90DG DVR90DG Logo DVD Playback – 1 Press [POWER] to turn the unit on. After you have completed connections; Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually near channel 0) for viewing the picture from this unit. -
Page 82: Dvd Recording
POWER OPEN/CLOSE TIMER ZOOM PROG. .@/: Easy Recording – 1 PQRS WXYZ REPEAT How to select the recording speed: Select the recording DISPLAY SPACE CLEAR SETUP speed. T OP MENU MENU/LIST RETURN ENTER Recording Disc Size speed XP (1H) SP (2H) REC SPEED 8cm Disc LP (4H)