Sylvania DVR90DG Owner's Manual page 74

Symptom
Others
The unit does not operate properly.
The disc tray does not open when
you press [OPEN/CLOSE A].
"Repairing" appears on the display.
Repairing
In a case you intend to cancel the
Repairing process.
Do you want to cancel a repairing process ?
When selecting "Yes", the disc may not be
usable.
Yes
Repairing
Error message
Disc Error
--- Please eject the disc. ---
Playback feature may not be
available on this Disc.
Region Error
--- Please eject the disc. ---
Playback is not authorized in your
region.
Parental Lock On
The current selected parental level
prohibits playback.
Recording Error
This program is not allowed to be
recorded.
Recording Error
This program is not recordable in
Video mode.
Recording Error
Can not record on this disc.
Recording Error
This program is not allowed to be
recorded on this disc.
Recording Error
This disc is protected and not
recordable.
Recording Error
Disc is full.
(No area for new recording)
74
Troubleshooting (cont'd)
Remedy
• When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it in again.
• It may take a few seconds for the disc tray to open after you have
recorded or edited a disc.
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after "Wait for a moment." message
is disappeared), a Repairing process will begin automatically just
90%
after turning the unit on again.
It may take several minutes up to about four hours.
• If you intend to cancel the Repairing process, press
[OPEN/CLOSE A] on the front panel, then select "Yes" with
[{ / B] and press [ENTER]. After that, press [OPEN/CLOSE A]
to take out the disc. The disc canceled the Repairing process
MAY NOT work.
No
90%
• Unplayable disc is inserted in the
unit.
• The disc is upside down.
• Playback is not authorized in the
region of the DVD-Video disc
which you inserted in the unit.
• The current selected parental
level in the Setup menu prohibits
playback.
• The recording function
encountered the copy prohibited
program.
• You are trying to record the copy-
once program onto the DVD-RW
disc in Video mode.
• You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
• The disc is dirty.
• The disc is damaged.
• You are trying to record the copy-
once program onto the DVD-RW
disc which is not compatible with
CPRM.
• You are trying to record on to the
protected disc which is set in the
Disc menu.
• You are trying to record onto
the disc which has no space for
recording.
Others
Cause Solution
• Insert the standardized disc which
bear the marks on page 37.
• Insert the disc with the labeled
side facing up.
• Insert the DVD-Video disc with
region codes 1 or ALL.
• Check the "Parental Lock" setting
(pages 70-71).
• You cannot record copy prohibited
programs.
• Set "Format mode" to "VR
mode"(page 26).
• Insert the recordable disc, and
ensure the disc status satisfies the
recording requirements
(pages 24-25).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• Insert the DVD-RW disc in VR
mode (ver.1.1 or 1.2 compatible
with CPRM).
• Release the disc protect setting in
the Disc menu (page 34).
• Insert the recordable disc with
enough recording space.