TP-Link EC330-G5u User Manual page 94

Chapter 12
¾ To run ping and traceroute tools:
1 ) Locate the Ping & Tracerroute
2 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Traceroute is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an internet
Protocol network.
3 ) Enter the Target IP Address/Domain Name
the default test options if necessary.
4 ) Click Start to begin the diagnostics, and you will find the test results in the gray
box.
section.
or Traceroute as the diagnostic tool to test the connectivity.
Manage Your Router
of the tested host. You can change
90