TP-Link EC330-G5u User Manual page 87

Chapter 11
¾ To enable or disable WPS function:
WPS (Wi-Fi Protected Setup) provides you with an easier approach to set up a security-
protected Wi-Fi connection. This function is enabled by default, but if you do not need
this function, clear the WPS
¾ To create guest-SSID network:
The router supports additional up to three guest-SSID wireless networks for client
access in each wireless band. You can specify the access and security settings to
ensure network security and privacy according to your situation.
1 ) Locate the
corresponding setup page.
2 ) Select the Enable SSID 1 (2
guest-SSID network.
3 ) Enter a new
sensitive. Don't select
the SSID for Wi-Fi access.
4 ) Select the Security
recommended, and you can set a password for the network.
If you want to allow the wireless devices on the guest-SSID network to
communicate with each other via methods such as network neighbors, Samba,
Ping, and FTP, select the
Enable check box and then click Save.
Guest-SSID section, and click
or 3) check box(es) to enable the corresponding
Network Name (SSID)
Hide SSID unless you want your guests to manually input
option for the guest-SSID network,
Allow Guests to Access Each Other
Customize Your Network Settings
2.4GHz or
or use the default name, this field is case
WPA/WPA2 Personal
5GHz to open the
is
check box.
83