TP-Link EC330-G5u User Manual page 23

Chapter 4
1. Place the router next to your host router and power it on.
2. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and Wireless Password printed on the label at the bottom of
the router.
3. Visit http://tplinkwifi.net, and log in with the password you set for the router.
4. Go to Settings or Advanced
Log in to the router via
5. Configure the basic settings of the wireless network.
• Method 1: Use Quick Setup wizard
Go to Quick Setup
wireless network name(SSID).
• Method 2: Manually configure the network connection
¾ To connect to the host network:
1 ) Go to Settings
(2.4GHz or 5GHz) you want to connect to.
2 ) Make sure the
Scan to detect all available wireless networks.
Tips:
1. You can also enter the SSID and MAC address of the host network in the corresponding fields and select the
security settings of the host network.
2. You can connect to both 2.4GHz and 5GHz wireless networks for a dual-band router, here we use the 2.4GHz
network as an example.
3 ) Select the wireless network you want to connect to by clicking the connect
icon in the Connect
security settings of that network will be automatically filled in.
> Operation Mode, select
http://tplinkwifi.net
to connect to the host network and specify your extended
> Wireless > Connect to
Enable check box of
column. Once the host network is selected, the SSID and
Set Up Internet Connection
Range Extender
after the router reboots.
Network, select the wireless band
Wireless Network is selected, and then click
and click Save.
19