TP-Link EC330-G5u User Manual page 13

Chapter 2
5. Verify that the following LEDs are on and solid before continuing with the configuration.
Note:
If the 2.4GHz LED and 5GHz LED
2 seconds, and check the LEDs again in a few seconds later.
6. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
• Method 2: Wireless
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
TP-Link_XXXX_5G
Connect automatically
√
Power
2.4G
On
On
are off, please press and hold the Wi-Fi On/Off button on the side panel for about
LAN
Connect
Internet
5G
On
On
Ethernet cable
Smart Device
< Settings Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
Or
TP-Link_XXXX
TP-Link_XXXX_5G
Other...
Connect the Hardware
9