Use Wps For Wireless Connection; Method 1: Use The Wps Button; Method 2: Use The Wps Button On The Web Management Page - TP-Link EC330-G5u User Manual

Chapter 11
If you want to allow the wireless devices on the guest-SSID network to
communicate with the devices connected to the router's LAN ports or main
network via methods such as network neighbors, Samba, Ping, and FTP, select
the Allow Guests to Access My Local Network
5 ) Repeat step 1) to step 4) to set other wireless networks if needed, and click
Save to make the settings effective.

11. 8. Use WPS for Wireless Connection

You can use WPS (Wi-Fi Protected Setup) to add a new wireless device to your existing
network quickly and easily.

11. 8. 1. Method 1: Use the WPS button

Use this method if your client device has a WPS button.
1. Press the WPS button of the router.
2. Press the WPS button of the client device directly.
3. The WPS LED flashes for about 2 minutes during the WPS process.
4. When the WPS LED is on, the client device has successfully connected to the router.

11. 8. 2. Method 2: Use the WPS button on the web management page

Use this method if your client device has a WPS button.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Click the Start WPS
4. Press the WPS button of the client device directly.
5. The WPS LED of the router flashes for about 2 minutes during the WPS process.
6. When the WPS LED is on, the client device has successfully connected to the router.
> Wireless > WPS page.
button on the page.
Customize Your Network Settings
check box.
84