TP-Link EC330-G5u User Manual page 43

Chapter 7
¾ To add a new queue:
1 ) Locate the Queue List
2 ) Specify the settings according to the explanation below.
• Direction: Select the data flow direction.
• Scheduler Algorithm:
(strict priority).
• Queue Name:
must have a unique name.
• Precedence:
more quickly with higher precedence. The precedence value ranges from 1 to
8, value 1 means the highest priority. This settings is valid when the algorithm
is SP.
• Min Rate: Set the minimum bandwidth guaranteed according to the precedence.
• Max Rate: Set the maximum bandwidth guaranteed according to the precedence.
• Weight: Set the queue's quota bandwidth of the left bandwidth after the Min
Rate of each queue is allocated.
3 ) Click Save to make the settings effective, and then the queue will be added to
the Queue List table.
Tips:
The total bandwidth allocated to the queue will be between the Min Rate and Max Rate if your ISP provides enough
bandwidths for the allocation.
section and click Add.
Displays the algorithm applied, the default setting is
Type a name for the queue as the identification. Every queue
Select the priority of the queue. The packets get through network
QoS
SP
39