Specifications - Shure KSE1200SYS User Manual

Specifications

Kit Specifications
Bias Voltage
200 V DC
Output Voltage
±200 V, max.
Output Current
≤ 1 mA
Sound Isolation
≤ 37 dB
Earphone
Specifications
Transducer Type
Electrostatic
Connector Type
Lemo Connector
Frequency Response
10 Hz to 50 kHz
Maximum SPL
1 kHz at 3% THD
113 dB SPL
Net Weight
44.0 g (1.55 oz.)
Battery Label Information
®
10
P S
E
2200mAh
WARNING
IS 16046/IEC 62133
R-41031674
KSA1200 Amplifier
Specifications
Signal-to-Noise Ratio
up to 107 dB A-weighted
Adjustable Gain Range
-40 dB to +60 dB
Line-In Input
3.5 mm (1/8")
USB Input
USB Micro-B Receptacle,
DC input
Housing
Black Anodized Aluminum
Net Weight
155.0 g (5.47oz.)
Dimensions
93 x 59 x 21 mm H x W x D
Battery Specifications
Battery Type
Rechargeable Li-Ion
Nominal Voltage
3.6 V DC
Battery Life
up to 12 hours
Charging Requirements
USB-powered: 5 V/0.5 A to 1 A
Charging Time
Up to 3 hours to full charge with
1A charger
MH27818
-
+
XV120004-14001A
National Power Corporation ®
(02)734-0653
Certifications
Industry Canada ICES-003 Compliance Label: CAN ICES-3
(B)/NMB-3(B)
Note: Testing is based on the use of supplied and recommended cable
types. The use of other than shielded (screened) cable types may
degrade EMC performance.
The product complies with the Appliance Efficiency Regulations
(California Code of Regulations, Title 20, Sections 1601 through
1608), dated July 2015 for Small Battery Charger Systems, and
is eligible for
marking.
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.
shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: info@shure.de
Product(s) are Certified under:
UL 60065
CAN/CSA-C22.2 No. 60065-03
IEC 60065
- Charging Temperature Range: 0°C - 27°C
- Operational Temperature Range: -18°C - 35°C
Patent Notice
U.S. patent number
• 9,210,497
Information to the user
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
7