Related Manuals for Shure KSE1200
Summary of Contents for Shure KSE1200
- Page 1 KSE1200SYS Analog Electrostatic Earphone System The Shure analog electrostatic earphone system, KSE1200SYS, user guide. Version: 5 (2020-A)
-
Page 2: Table Of Contents
Shure Incorporated Table of Contents Choosing a Sleeve KSE1200SYSAnalog Electrostatic Earphone System Wearing the Earphones Changing Sleeves IMPORTANT SAFETY INSTRUCTIONS Removing the Earphones WARNING FOR ALL EARPHONES! Maintenance and Cleaning WARNING Cleaning the Earphone Nozzle General Description Troubleshooting Features Accessories... -
Page 3: Kse1200Sysanalog Electrostatic Earphone System
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment. WARNING FOR ALL EARPHONES! For safe and correct use of earphones, read this manual before use. -
Page 4: Warning
Shure Incorporated WARNING LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOL UME AS POSSIBLE. Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs. -
Page 5: General Description
Please follow your regional recycling scheme for batteries, packaging, and electronic waste. General Description The Shure KSE1500 analog electrostatic earphones are the result of many years of research, development, and technological advancements from the Shure engineering team. The electrostatic drivers deliver premium quality, high definition audio for the first time in an in-ear design, which provides superior comfort and isolation from outside noise. -
Page 6: Ksa1200 Amplifier
3.5 mm stereo input for connecting to analog audio sources ④ Earphone Output Lemo output to connect Shure KSE1500 earphones ⑤ DC Input Connect to a computer, external battery, or AC power source using a USB type A to Micro-B cable to automatically recharge the battery. -
Page 7: Setup
To avoid degrading battery health, keep the storage temperature range between 10°C to 25°C (50°F to 77°F). Battery Repair and Replacement Lithiumion batteries have no “memory effect”, and instead experience a more linear reduction in capacity. Contact Shure Ser vice and Repair to replace the battery if you experience any issues. -
Page 8: Using Earphones
Shure Incorporated Using Earphones Choosing a Sleeve Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove. Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber. -
Page 9: Removing The Earphones
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves). -
Page 10: Cleaning The Earphone Nozzle
Shure Incorporated • To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing. -
Page 11: Accessories
Earphones sound dull Follow the instructions on cleaning the earphone nozzles with the supplied cleaning tool. or muffled Battery no longer holds Contact Shure Service and Repair to arrange to have the battery replaced. There are no user- charge serviceable parts. Accessories Furnished Accessories •... -
Page 12: Earphone Specifications
Shure Incorporated Sound Isolation ≤ 37 dB Operating Temperature Range -18 to 57 °C (0 to 135 °F) Earphone Specifications Transducer Type Electrostatic Connector Type Lemo Connector Frequency Response 10 Hz to 50 kHz Maximum SPL 1 kHz at 3% THD... -
Page 13: Battery Specifications
1608), dated July 2015 for Small Battery Charger Systems, and is eligible for marking. This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East &... -
Page 14: Patent Notice
Shure Incorporated Patent Notice U.S. patent number • 9,210,497 Information to the user This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.