Facie Of Remote Controller - Swann P-6T4 User Manual

2.4.2 Facie of Remote Controller

The entire facie of the Remote Controller is shown in Fig2.3 Remote Controller.
All buttons on the Remote Controller describes as below table. You could use "A" button on the Remote Controller to
switch the input mode.
Button Name
POWER
REC
INFO
1-16
1X1
6
Digital Video Recorder User Manual
Fig2.3 Remote Controller
Power Button
Press the button to shutdown the DVR.
Record Button
If the DVR does not record, press the button to start recording. If the DVR is recording, press the button to stop
recording.
Information Button
Press the button to display state information of the DVR on the screen.
Number Buttons
These number buttons are used for selecting channels and other functions.
Full-screen display mode
Press the button to display the picture of single channel.
Description