Table of Contents
Advertisement
STEP1
Click
STEP2
Press "Enter" key to login.
Notice: Click "EXIT" button, you could exit the system.
4.2.2 Snap Picture
Snap live picture. Press
4.2.3 Parameter Settings
Parameter Settings window could set the amount how many picture you snap once. If you select 5, you can snap five
pictures every time when you click "Snap Picture" button.
4.2.4 Record
STEP1
Click "DVR Record" button.
STEP2
Select "Start Record" in drag-down list to record.
STEP3
Select "Stop Record" in drag-down list to stop recording.
4.2.5 Camera Audio
You could set to open or close the camera audio.
STEP1
When you are in live display mode or playback mode, select a channel to display in Large Picture mode.
STEP2
Right-click the picture, and select "Open Audio" to play the camera audio.
STEP3
Click
4.2.6 DVR Status Panel
Meaning of the colors for indicator lights in the Main Interface are shown as below:
1.
Grey indicator light: Normal State.
2.
Green indicator light: Manual Record State.
3.
Yellow indicator light: Motion Detection Record State.
4.
Red indicator light: Sensor Alarm Record State.
5.
Blue indicator light: Video Loss State.
Digital Video Recorder User Manual
button to input username and password in the pop-up box.
to snap the picture.
button to turn up or turn down the audio.
45
Advertisement
Table of Contents
