Chapter 4 Remote Surveillance; Accessing Dvr; Accessing Dvr In Lan - Swann P-6T4 User Manual

4.1 Accessing DVR

Because our DVR supports IE control, you need use IE connect to DVR and download and install ActiveX controls for
remote controlling the DVR.
Before remote controlling the DVR, you need right connect the DVR and cable to internet. If you access the DVR through
WAN, you need to set DVR and router parameters firstly.
DVR could support five users logging in and operating the Network Client synchronously.

4.1.1 Accessing DVR in LAN

When your computer is connected in LAN, you can access DVR according to following steps for using IE browser.
STEP1 Double-click the IE browser icon to open the IE browser.
STEP2 Input the IP address in IE textbox and press "Enter" key.
STEP3 Install ActiveX controls in displayed page.
STEP4 After finishing installing, the system will connect to DVR automatically. It will display Network Client interface,
referred Figure4-1 Network Client Interface.
Digital Video Recorder User Manual

CHAPTER 4 Remote Surveillance

41