Supermicro H11SSL-I/C/NC User Manual page 67

Memory Interleaving Size
This setting controls the memory interleaving size. This determines the starting address of
the interleave (bit 8, 9, 10 or 11). Options include 256 Bytes, 512 Bytes, 1 KB, 2 KB or Auto.
Chipset Interleaving
When enabled, this setting will interleave memory blocks across the DRAM selects for
Node 0. Options include Disabled and Auto.
BankGroupSwap
Use this setting to enable/disable BankGroupSwap. Options include Enabled, Disabled
and Auto.
CPU1 Memory Information

These sections are for informational purposes. They will display some details about the
detected memory according to each CPU on the motherboard, such as:
• Detected Size (per slot, in MB)
• Current Speed (MT/s)
ACPI Settings

High Precision Event Timer
The High Precision Event Timer (HPET) can produce periodic interrupts and is used to
synchronize multimedia streams, providing smooth playback and reducing the need to use
other timestamp calculations. The options are Enabled and Disabled.
Super IO Configuration
The following Super IO information will display:
•
Super IO Chip AST2500
Serial Port 1 Configuration
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This item displays the status of a serial part specified by the user.
Chapter 4: BIOS (for EPYC 7001 Series)
67