Supermicro H11SSL-I/C/NC User Manual page 109

Local IP Address
This item sets and displays the Local IP address for this computer. This should be in decimal
and in dotted quad form.
Local Net Mask
This item sets the sub-network that this computer belongs to. The value of each three-digit
number separated by dots should not exceed 255.
Local Gateway
This item sets the Gateway IP address for this computer. This should be in decimal and in
dotted quad form (i.e., 172.31.0.1).
Local DNS
This item sets the address for the local DNS servers for this computer. This should be in
decimal and in dotted quad form (i.e., 172.31.0.1).
Save Changes and Exit
Click this to save the changes above.
IPV6 Network Configuration
This section displays configuration features for IPV6 support.
IPV6 Support
Use this feature to enable IPV6 support. The options are Enabled and Disabled.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are Unspecified, Static, and DHCP.
*If the item "Configuration Address Source" above is set to Static, the following items
will become available for configuration:
•
Station IPV6 Address
•
Prefix Length
•
IPV6 Router1 IP Address
Chapter 5: UEFI BIOS (for EPYC 7002 Series)
109