Supermicro H11SSL-I/C/NC User Manual page 129

Note: If you cannot locate the "Super.ROM" file in your driver disk, visit our website
at www.supermicro.com
rename it "Super.ROM".
2. While the system is turned off, insert the USB device that contains the new BIOS binary
image (SUPER.ROM).
3. Power on the system.
4. After the system is turned on, the system will enter the BIOS Recovery menu. Select
"Proceed with flash update" to start the BIOS recovery process. DO NOT INTERRUPT
THIS PROCESS UNTIL IT IS FINISHED!
to download the BIOS image into a USB flash device and
129
Appendix C: UEFI BIOS Recovery