Siemens SITOP Series Operating Instructions Manual page 34

Technical data
6.2 Output
Figure 6-3
Figure 6-4
The device supplies a constant output voltage until the current limit is reached. In the event
of an overload, the output current and the output voltage are reduced.
Change-over switch A on:
Parallel operation. The output voltage falls with increasing output current.
Figure 6-5
34
Output characteristic curve 6EP3333-8SB00-0AY0 stand-alone operation
Output characteristic curve 6EP3334-8SB00-0AY0 stand-alone operation
Output characteristic curve 6EP3333-8SB00-0AY0 parallel operation
Operating Instructions, 06.2014, C98130-A7633-A1-2-7629
SITOP PSU8200 1ph