IBM Storwize V7000 Unified Problem Determination Manual page 35

Table 7. Error messages and actions (continued)
Error code Error message
0A0E Error setting ASU command.
0A0F Unable to determine adapter name from VPD.
0A10 Unable to open the ifcfg file.
0A11 Unable to write to the ifcfg file.
0A12 Unable to bring adapter down.
0A13 Unable to bring adapter up.
0A14 Unable to determine adapter name from VPD.
0A15 Unable to open the ifcfg-alias file.
0A16 Unable to write to the ifcfg-alias file.
0A17 Unable to bring adapter-alias down.
0A18 Unable to bring adapter-alias up.
0A19 Unable to retrieve adapter name.
0A1A Incorrect parameters.
0A1B Adapter value not valid.
0A1C Alias value not valid.
0A1D DHCP is not valid on this adapter.
0A1E DHCP is not valid on aliases.
0A1F Invalid IP address.
0A20 Invalid netmask.
0A21 Invalid Gateway IP Address.
0A22 Gateway, netmask, and IP are incompatible.
0A23 Gateway is not valid on this adapter.
0A24 Alias is null.
0A25 Could not drop aliases.
0A26 Invalid adapter for Storwize V7000.
0A27 Invalid alias state argument.
0AA5 Invalid inputs.
0AA6 Called with invalid host name.
0AA7 Error sending password.
0AA8 A node name was not provided.
0AA9 Invalid management IP address.
0AAB Invalid RSA IP address.
0AAC Invalid IP for management node.
0AAD The node is already a part of a cluster.
0AAE Error while setting storage node peer.
0AAF Unable to get node roles from VPD.
0AB0 Error opening /etc/sysconfig/rsyslog.
0AB1 Error writing to /etc/sysconfig/rsyslog.
0AB2 Error reading /etc/rsyslog.conf.
Action key
B
A
A
A
A
D then C then B
A
A
A
A
D then C then B
A
D
A
A
A
A
D
D
D
D
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Chapter 3. Getting started troubleshooting
15