Cisco Catalyst IE3400 Heavy Duty Series Installation Manual page 26

Running Express Setup
If the port LEDs do not turn green after about 30 seconds, make sure that:
• You connected the Ethernet cable to the top left port labeled 1/1.
• You are using an undamaged Category 5 or 6 Ethernet cable.
• The other device is turned on.
Step 5 Start a browser session on the PC. A login prompt appears.
Step 6
Enter ip address 192.168.1.254 into the browser URL bar. If a security warning appears accept the risk. A
login prompt appears.
Step 7
Username is 'admin', and password is system serial number found on the side of the switch next to the SD
Card Cover.
The Configuration Setup Wizard Setup web page appears.
If it does not appear, make sure that any pop-up blockers or proxy settings on your browser are disabled and
that any wireless client is disabled on your PC.
Step 8
The first of four web pages appears. You will need to navigate through all four web pages to complete express
setup. In the Account Settings page, provide values for all fields with "*" .
• Enter a Login Name.
• Command Line Password should be set to Sync to Login Password from the dropdown menu.
• Date & Time is optionally set to NTP Time from the dropdown menu.
Step 9
Click Basic Settings once the settings are correct.
The Basic Settings window is displayed.
• Enter an IP address. (This field is mandatory).
• SSH: click the enable box.
• (Scroll down using right side scroll bar to address all mandatory fields)
Step 10 Click Swith Wide Settings.
The Switch Wide Settings window is displayed (No required fields on this page).
Step 11
Click Summary.
The Summary window is displayed.
Step 12 Verify the information displayed in the summary is correct, and when ready click Submit.
In case of an error do the following:
• Verify connectivity:
• Open a command prompt, type ping 192.168.1.254, all replies should be received.
• Do not unplug PC from the switch
• In case of error or to return IE switch to Manufacturing defaults:
Cisco Catalyst IE3400 Heavy Duty Series Hardware Installation Guide
18
Switch Installation