Console Management Port - Cisco Catalyst IE3400 Heavy Duty Series Installation Manual

Product Overview
Figure 5: Alarm Connector
1 NO Alarm Output Normally Open (NO) connection
2 NC Alarm Output Normally Closed (NC) connection
3 Alarm In

Console Management Port

You can connect the switch to a PC running Microsoft Windows or to a terminal server through the 5-pole
A-coded console port and configure it by using the CLI. The baud rate and format of the console port is:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• None (flow control)
Figure 6: Console Connector
1 RTS
2 CTS
3 TXD
Note
For specified cable, use Cisco Product CAB-CONSOLE-M12=
4 RXD
5 GND
Cisco Catalyst IE3400 Heavy Duty Series Hardware Installation Guide
Console Management Port
4 Alarm In Reference
5 COMMON Alarm Common connection
5