Preset Programs - Smeg SFA4140VC1 Manual

The residual water is discharged into the
evaporation tray: as well as facilitating
removal, this contributes to cooling down
the oven more quickly.
If the remaining quantity of water is over
500 ml, the water will be discharged into
the evaporation tray in two different steps to
facilitate drying. The display will show
"STEP 1"; when this finishes, draining will
stop. You must press the control knob again
to complete the draining with "STEP 2".
When this finishes, the message "reservoir
emptying ended" will be displayed.
6. Press "ok" to confirm.
7. Squeeze out the water absorbed by the
sponge into a separate container.
Take care: the water may be very
hot.
44
Use

3.7 Preset programs

This mode allows you to select a previously
stored program for cooking food. The
appliance will automatically calculate the
optimum cooking parameters according to
the weight selected.
Select the preset programs
the "home screen".
In this function, cooking itself is
preceded by a preheating stage,
which allows the oven to heat to
the cooking temperature more
quickly.
When the preheating stage is over
a buzzer will sound to indicate that
the food can be placed inside the
oven. Introduce the food and then
press the function knob to proceed
with cooking.
icon on