Board (Hkcu-904) - Sony HDCU-900 Series Installation And Maintenance Manual

1-5. Settings of Switches and Controls on Boards
1-5-6. LC-41 Board (HKCU-904)
9 8 7 6
S1
S2
S27 S3
S11
S21
S23 S24
S12
S22
S13
S25 S26
. S1
Not used.
. S2 (1080/1035/720P SEL)
When S804 on the DPR-163 board is set to LOCAL, set
the conversion format of the VSP-MAIN OUTPUT
signal.
1080 : Not used.
1035 : Not used.
720P : 720/60P
Factory setting : 720P
. S3
Not used.
. S11 to S13
Not used.
1-22 (E)
5 4 3 2 1
LC-41 board (A side)
. S21, S22
Not used.
A
. S23 (DELAY FRAME/MIN)
Selects the delay amount of the signal that is converted
B
of its format by HKCU-904.
FRAME : Unity phase mode with 1 frame delay
C
MIN : Minimum delay mode equivalent to 90H
lines of HD signal.
D
Factory setting : FRAME
E
. S24
Not used.
F
G . S25 (SYNC LC/UPPER)
Selects the SYNC signal that is output to the SYNC
H
OUTPUT connector/SDI-54C board.
LC : HD SYNC that is converted of its format by
J
the LC-41 board
UPPER : SYNC signal that is output from the slot on
K
the front, that is one slot higher than the slot
in which the LC-41 board is installed.
L
Factory setting : LC
M
. S26, S27
Not used.
HDCU-900 IMM