Board (Hkcu-903) - Sony HDCU-900 Series Installation And Maintenance Manual

1-5-5. FC-83 Board (HKCU-903)
9 8 7 6
S1
S2
S3
S27
S11
S21
S23 S24
S12
S22
S13
S25 S26
. S1
Not used.
. S2 (24/25/30 SEL)
When S804 on the DPR-163 board is set to LOCAL, set
the conversion format of the VFS-MAIN OUTPUT
signal.
24 : 24 Hz frame (Reserved)
25 : 25 Hz frame (Reserved)
30 : 30 Hz frame
Factory setting : 30
. S3 (i/PsF/P SEL)
When S804 on the DPR-163 board is set to LOCAL, set
the conversion format of the VFS-MAIN OUTPUT
signal.
i : Interlace system
PsF : PsF system
P: Progressive system (Reserved)
Factory setting : i
HDCU-900 IMM
5 4 3 2 1
FC-83 board (A side)
(Reserved)
. S11 (RETURN AUTO/MANUAL)
Set the format of the RETURN VIDEO signal to be
input in the FC-83 board.
A
AUTO : Auto setting
MANU : Depends on the settings of S12 and S13 on
B
the FC-83 board.
Factory setting : AUTO
C
. S12 (24/25/30 SEL)
D
When S11 on the FC-83 board is set to MANU, set the
format of the RETURN VIDEO signal to be input in the
E
FC-83 board.
24 : 24 Hz frame (Reserved)
F
25 : 25 Hz frame (Reserved)
G
30 : 30 Hz frame
Factory setting : 30
H
. S13 (i/PsF/P SEL)
J
When S11 on the FC-83 board is set to MANU, set the
format of the RETURN VIDEO signal to be input in the
K
FC-83 board.
i : Interlace system
L
PsF : PsF system
P : Progressive system (Reserved)
M
Factory setting : i
. S21, S22
Not used.
. S23 (FRAME REF)
When inputting the FRAME REFERENCE signal, set
ON.
Factory setting : OFF
. S24 (S.SYNC MODE)
Select whether the S.SYNC signal is automatically
detected or it forcibly is output.
AUTO : Auto detection
ACTIVE : Forced output
Factory setting : AUTO
. S25, S26
Not used.
. S27 (FRAME REF SEL)
Select the FRAME REFERENCE signal to be input.
0 : FRAME REF HD
1 : FRAME REF SD
2 : FRAME REF S.SYNC
Factory setting : 0
1-5. Settings of Switches and Controls on Boards
(Reserved)
1-21 (E)