Set The Answer Delay; Set The Recording Time Of Incoming Message; Activate Remote Access; Change The 4-Digit Remote Access Pin - Geemarc CL595 User Manual

17.5.6

Set the Answer Delay

You can set the number of rings before the answering machine answers and starts playing your OGM.
You can set the answering machine to answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first new message has been
registered - then the answering machine switches to answering after approximately 2 signals. This is
useful when using remote access; if you call up the answering machine and there is no reply after
four rings that means there are no messages recorded and you can hang up before you are charged
for the call.
1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
8 RINGS, 10 RINGS or TALL SAVE)
4. Scroll MENU/OK and
5. Press MENU/OK to confirm.
17.5.7

Set the Recording Time of Incoming Message

You can set the maximum length of the recording time of the incoming messages.
1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
4. Press MENU/OK and
60S, 120S, 180S, or UNLIMITED).
5. Press MENU/OK to confirm.
17.5.8

Activate Remote Access

Your phone lets you check your messages, or otherwise operate your answering machine, by calling
the answering machine when you are away from home by entering a 4-digit remote access PIN on a
tone-dialing phone. Use the 4-digit remote access PIN code to prevent other people from unauthorized
access of your answering machine.

17.5.8.1 Change the 4-Digit Remote Access PIN

1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
4. Press MENU/OK and enter your new code pin
5. Press MENU/OK to confirm.
/ to select ANS. SYS.
/ to select SET TAM.
/ to select ANS DELAY (Available options: 2 RINGS, 4 RINGS, 6 RINGS,
.
/ to select the desired answer delay.
/ to select ANS. SYS.
/ to select SET TAM.
/ to select REC TIME.
/ to select your desired recording time (Available options:
/ to select ANS. SYS.
/ to select SET TAM.
/ to select CHANGE PIN.
35