Acura 2009 TL Owner's Manual page 94

Main Menu
Keyless Memory Settings
You can customize some vehicle
control settings. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park.
If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shift lever out
of Park, the display will change to
the normal screen.
＊ : Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0),
ACCESSORY Mode is the
equivalent of ACCESSORY (I),
and ON Mode is the equivalent
of ON (II). For more
information, see pages
180 .
Table Of Contents
TM If you try to enter the customizing
mode while the vehicle is moving,
you will see a ''MUST STOP AND
＊
SHIFT TO PARK TO CHANGE
SETTINGS'' message and you
cannot change the settings.
You can customize some vehicle
＊ control settings for ''DRIVER 1'' and
''DRIVER 2'' separately.
To have the driver's ID detected,
make sure the driver's door is
unlocked with a corresponding
remote transmitter/keyless access
remote.
178 and
2009 TL
Multi-Information Display
On models without keyless access
system
If you use the key to unlock the
driver's door, the system cannot
recognize either ''DRIVER 1'' or
''DRIVER 2.''
CONTINUED
91