Acura 2009 TL Owner's Manual page 414

Main Menu
To activate this function, do this:
1. Press and release the Talk button.
After the beep, say ''System setup.''
HFL responds ''System setup
options are security, change
passcode, call notification, auto
transfer, and clear. Press the Talk
button and say a command.''
2. Press and release the Talk button.
After the beep, say ''Auto transfer.''
If this feature is set to off, HFL
responds ''Auto transfer is
disabled. Calls dialed on the phone
do not automatically transfer to
Bluetooth HandsFreeLink. Would
you like to enable Auto Transfer?
Press the Talk button and say Yes
or No.''
Table Of Contents
Bluetooth HandsFreeLink (Models without navigation system)
If this feature is set to on, HFL
responds ''Auto-transfer is enabled.
Calls dialed on the phone will be
automatically transferred to
Bluetooth HandsFreeLink. Would
you like to disable Auto Transfer?
Press the Talk button and say Yes
or No.''
3. If the setting changes from off to
on, press and release the Talk
button. After the beep, say ''Yes.''
HFL responds ''Auto transfer is
enabled.''
When you make a call directly from
the phone with the auto transfer on,
make sure to stop your vehicle safely.
To end the call, press the Back
button.
Never try to dial from your
NOTE:
phone directly if the vehicle is
moving.
2009 TL
If the setting changes from on to off,
HFL responds ''Auto transfer is
disabled. Use the Transfer command
at the HandsFree main menu to
manually transfer calls dialed on the
phone.''
411