Acura 2009 TL Owner's Manual page 168

Main Menu
Doing any of the following after
pressing the SET button will cancel
the storing procedure:
Not press a memory button within
5 seconds.
Readjust the seat position.
Readjust the outside mirror
position.
On models without keyless access
system
Turn the ignition switch out from
the ON (II) position.
On models with keyless access system
Change the power mode out from
ON.
Table Of Contents
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
Driving Position Memory System
2009 TL
Selecting a Memorized Position
MEMORY BUTTONS
To select a memorized position, do
this:
1. Make sure the shift lever is in
Park.
2. Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
CONTINUED
165