Acura 2009 TL Owner's Manual page 283

Main Menu
Playing the AM/FM Radio (Models with navigation system)
TUNE
TUNE Use the TUNE bar to tune
−
the radio to a desired frequency.
Press the side of the bar to tune
to a higher frequency, or the
side to tune to a lower
frequency. To tune with the
interface dial, push the interface
selector down, and turn the interface
dial to select Tune. Then press
ENTER on the interface selector,
and turn the interface dial to the
desired frequency. To exit the
TUNE mode, press ENTER on the
280
Table Of Contents
interface selector, then push the
interface selector up to go back.
SKIP (SEEK)
function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side (
) of the SKIP bar, then release
it.
The skip (seek)
−
or
2009 TL
SCAN
SCAN The SCAN function
−
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN side of
the SCAN A.SEL bar, then release it.
To scan with the interface dial, push
the interface selector down, and turn
the interface dial to select Scan, then
press ENTER on the interface
selector.