Table of Contents
Advertisement
Main Menu
Playing a USB Flash Memory Device (Models with navigation system)
To Play a USB Flash Memory
Device
This audio system can select and
play the audio files on a USB flash
memory device with the same
controls used for the disc player. To
play a USB flash memory device,
connect it to the USB adapter cable
in the console compartment, then
press the HDD/AUX button until
you see ''AUX'' in the display. The
power mode must be ACCESSORY
or ON.
Your vehicle has the engine start/
stop button instead of an ignition
switch. For more information to
select the power mode, see page
356
Table Of Contents
The audio system reads and plays
the audio files on the USB flash
memory device in MP3, WMA or
＊
AAC formats. The USB flash
memory device limit is up to 700
folders or up to 15000 files.
＊
:
Only AAC format files recorded
with iTunes are playable on this
audio unit.
The recommended USB flash
memory devices are 256 Mbyte or
higher. Some digital audio players
may be compatible as well.
Some USB flash memory devices
178
.
(such as devices with security lock-
out features, etc.) will not work in
this audio unit.
2009 TL
NOTE:
Do not use a device such as a card
reader or hard drive as it or your
files may be damaged.
Do not connect your USB flash
memory device using a hub.
Do not use an extension cable to
the USB adapter cable equipped
with your vehicle.
Do not keep a USB flash memory
device in the vehicle. Direct
sunlight and high heat will damage
it.
We recommend backing up your
data before playing a USB flash
memory device.
Depending on the type and
number of files, it may take some
time before they begin to play.
Depending on the software the
files were made with, it may not be
possible to play some files, or
display some text data.
Advertisement
Chapters
Table of Contents
