Table of Contents
Advertisement
Main Menu
Lights
HOLDING
CLIP
SPOILER
3.
Use a 10 mm wrench to remove
the two mounting bolts and
remove the holding clip with a flat-
tipped screwdriver.
Pull down the under cover from
the bumper carefully.
562
Table Of Contents
BOLTS
4.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
5.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
BULB
CONNECTOR
2009 TL
Insert the new bulb into the hole,
6.
and turn it one-quarter turn
clockwise to lock it in place.
7.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
8.
Turn on the fog lights to test the
new bulb.
9.
Push the under cover in place and
set the spoiler and inner fender
cover in the original position.
Install the bolts and holding clips,
and lock them in place by pushing
on their center.
Advertisement
Chapters
Table of Contents
