Clean Filter - Kohler VEIL WALL FACED Installation Instructions Manual

I. Clean Filter
Loosen filter locknut, as shown.
Clean filter dirt with water and tighten locknut back in
original position.
J. Discharge valve adjustment
Adjust water tank flush volumes as shown:
Full Flush: 1. Open adjustment switch
2. Open small hole
Half Flush: 1. Adjust float box position
(water level should be on the bottom of float box)
K. Water inlet valve adjustment
Adjusting the control pole will cause the water level to
change within the water tank.
Turn the pole clockwise to increase the water level and
anti-clockwise to reduce it.
Kohler Co. Jan 2018
Filter
Fig.#49
Adjustment Switch
Fig.#50
Inlet Valve
Fig.#51
22
Filtration Net
Tighten
Locknut
Loosen
Floating Box
Drainage valve
Control Pole
Floating Box
1345889-A02-A