Water Level Adjustment - Kohler VEIL WALL FACED Installation Instructions Manual

9. After completing the wiring work, adjust power
input and lock the junction box cover.
10. Ensure the in-wall tank water outlet hose
connection is tightened and does not leak.
11.Turn power switch to ON and open water inlet
valve.
12. Apply silicone sealant around the back edge of the pan
to ensure a clean adhesion to the wall.
Install the left and right side panels.
Apply silicon gel
G. Water Level adjustment
1. Follow the steps 6 to 11 on page 19 and 20 of this document
to remove the water inlet valve.
Kohler Co. Jan 2018
Power switch is OFF
Green light OFF
Fig.#25
Fig.#26
Water inlet valve
Fig.#27
14
Valve is ON
In-Wall tank
water outlet hose
Side panel
1345889-A02-A