Installing Digi Realport Software For The 7036-P16 Device - IBM Bull Escala E5-700 Manual

Installing Digi RealPort software for the 7036-P16 device

You might need to install the Digi RealPort software on an AIX or Linux host server. Use the procedure
in this section to perform this task.
Digi RealPort software-support packages
The following is a list of the software packages available on the software CD provided with the 7036-P16
unit:
v The Digi RealPort software package for AIX supports the following AIX levels:
™
– AIX 5L 5.2.0.75 (and later)
– AIX 5L 5.3.0.30 (and later)
v The Digi RealPort software package for Linux supports the following Linux levels:
– Linux Red Hat Version RHEL4, Update 3
– Linux SUSE Version SLES 9 SP2
Installing the Digi RealPort software
To install the Digi RealPort software, do the following steps:
1. Install all updates and packages required to bring the operating system to the supported levels.
2. Install all Linux packages required to compile and create binaries from the Digi RealPort Software
source code.
The following is a list of Linux packages that are required to install the Digi RealPort software:
v gcc
v gcc-64bit
v gcc-c++
v gcc-g77-64bit
v gcc-info
v gcc-locale
v gcc-objc
v gcc-objc-64bit
v kernel sources
v glibc-devel-64bit
v ncurses-64bit
v ncurses-devel
3. Install the Digi RealPort software. To install the software, see the following procedures.
Installing the AIX Digi RealPort software
To install the software package for the AIX environment, do the following steps:
1. Log in to the host server as the root user.
2. Insert the CD-ROM into the CD-ROM drive.
3. Type the following command: smitty install_all
4. Press F4.
5. Select digiasync, then press Enter.
6. Use the cursor to scroll to ACCEPT new license agreement
7. Press F4.
8. Select Yes, then press Enter.
86
Power Systems: Managing devices