1
When the switch is set to the right, data can be written to and read from the tape.
2
When the switch is set to the left, data can only be read.
Status lights (FC 5619)
You might need to read the status lights on your tape drive to determine the operating status of the
drive. Use the information in this topic to perform this task.
The following illustration is a front view of the tape drive:
Figure 7. Front-view of tape drive
1
Cleaning LED (amber)
2
Media fault LED (amber)
3
Drive fault LED (amber)
4
Ready/Activity LED (green)
5
Unload/Reset button
The combinations of the lights and their definitions are shown in the following table.
58
Power Systems: Managing devices