Reverse this procedure to install the volume button board.
USB board
NOTE:
The USB board spare part kit does not include the USB board cable.
Description
USB board
USB board bracket
USB board cable
IMPORTANT:
and replacement.
Before removing the USB board, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the display panel (see
component:
▲
Battery (see
Remove the USB board:
1.
Release the ZIF connector from the system board and USB board (1).
30
Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Display panel assembly on page
Battery on page
24).
Spare part number
L17076-001
L17073-001
L17067-001
20), and then remove the following