Table 3-2 Disk Drive Troubleshooting - Compaq XP1000 Installation And Setup Manual

Problem
Hard disk drive cannot Incorrect SCSI drive ID settings.
read or write
information.
Loose or incorrectly installed
cables.
Disk drive is not correctly
formatted or partitioned.
C:
SCSI bus is terminated
improperly.
Compaq Confidential – Need to Know Required
Writer: Shared Engineering Services Project: Compaq Professional Workstation XP1000 Comments:
Part Number: EK-CPWXP-S1.B01 File Name: d-ch3 Troubleshooting.doc Last Saved On: 5/28/99 2:47 PM
Table 3-2
Disk Drive Troubleshooting
Probable Cause
Set the SCSI ID.
Refer to the disk drive installation instructions.
Make sure all cables are correctly installed.
Format and partition as required using the
supplied operating system.
Ensure that the SCSI bus is terminated properly.
The last device on the cable should terminate
the bus or no devices should have termination
and the cable should be terminated with the
12-45538-01 active terminator.
Troubleshooting 3-11
Action
continued