Updating Firmware - Compaq XP1000 Installation And Setup Manual

Table 2-3
Starting an Installation of Compaq Tru64 UNIX
Step Action
4 Insert the CD-ROM for
Compaq Tru64 UNIX into
the CD ROM drive.
5
At the SRM prompt, type:
>>>show device
6 From the SRM console,
boot the CD for Compaq
Tru64 UNIX.
>>>boot DQA0

Updating Firmware

NOTE: The user is responsible for performing system firmware upgrades. When updating
firmware, use the firmware CD version 5.4 or higher.
The Compaq Professional Workstation XP1000 system contains flashROM for
the console firmware. The flashROM contains the AlphaBIOS console
firmware (for the Microsoft Windows NT operating system) and the SRM
console firmware (for the Compaq Tru64 UNIX operating system).
This section explains how to use the firmware update utility to install firmware
upgrades. Consult the appropriate operating system-specific section (e.g.,
Microsoft Windows NT or Compaq Tru64 UNIX).
IMPORTANT: Consult your upgrade documentation for more information.
Compaq Confidential – Need to Know Required
Writer: Shared Engineering Services Project: Compaq Professional Workstation XP1000 Installation and Setup Guide Comments:
Part Number: EK-CPWXP-S1.B01 File Name: c-ch2 Setting Up an Operating System.doc Last Saved On: 5/28/99 11:47 AM
CD-ROM drive is ready.
List of devices displays:
dka0.0.0.6.1 DKA0 Quantum XP34550W LXTA
dkb0.0.0.11.0 DKB0 RZ2DD-KS 0306 (if SN-KZPCA-AA is
installed
dqa0.0.0.107.0 DQA0 Compaq D VD-TOM SR-8583
A50A
dva0.0.0.0.0 DVA0
ewa0.0.0.3.1 EWA0 00-00-F8-71-32-60
pka0.7.0.6.1 PKA0 SCSI Bus ID7 5.57
Installation information is displayed, and you are prompted to select an
option. For more information, see the Compaq Tru64 UNIX Installation
Guide.
Setting Up an Operating System 2-9
continued
Result