Compaq XP1000 Installation And Setup Manual page 24

2-4 Compaq Professional Workstation XP1000 Installation and Setup Guide
Step
6 Select Compaq Professional Workstation
XP1000 (Your screen may show a
different series name.)
Press [Enter].
7 Insert the 1.44-MB diskette labeled
Hardware Support Disk for Microsoft®
Windows NT® 4.0 (AK-REQP*-CA) into
the 1.44-MB drive.
Press [Enter].
8 Type " S" to select additional devices.
9 Select Other.
Writer: Shared Engineering Services Project: Compaq Professional Workstation XP1000 Installation and Setup Guide Comments:
Part Number: EK-CPWXP-S1.B01 File Name: c-ch2 Setting Up an Operating System.doc Last Saved On: 5/28/99 11:47 AM
Table 2-1
Starting a Microsoft Windows NT Installation
Action
Compaq Confidential – Need to Know Required
continued
Result or Displayed Text
" Please insert the disk labeled Manufacturer-supplied
hardware support disk into Drive A:. Press Enter when
ready."
Setup could not determine the type of one or more mass
storage devices installed in your system, or you have
chosen to manually specify an adapter. Currently, Setup will
load support for the Qlogic PCI SCSI Host adapter and the
Symbios Logic PCI (53c8xx), if SN-KZPCA-AA is present. To
add the SN-KZPCA-AA card, type " S" .
Select the SCSI adapter you want from the following list, or
select " Other" if you have a device support disk provided by
an adapter manufacturer.
.
.
.
=>Other
" Please insert the disk labeled Manufacturer-supplied
hardware support disk into Drive A:. Press Enter when
ready."
continued