Technical Data; Voltage Supply And Current Consumption - Bosch Rexroth IndraControl XFE 01.1 Series Operating Instructions Manual

Bosch Rexroth AG

Technical data

NOTICE
Due to the risk of corrosion, avoid sulphurous gases (e.g. sulphur dioxide (SO
and hydrogen suphide (H
NOTICE
To avoid overheating and a trouble-free operation of the product, the ambient air
has to circulate. Also refer to
This is a product that corresponds to the limit values of the emitted
interference of class A (industrial environments), but not of class B
(residential area and small enterprises).
When using the product in residential areas or small enterprises, the
operator has to take actions to prevent radio interferences (also re-
fer to DIN EN 55022).
7 Technical data
Weight
Degree of protection
Tab. 7-1: Technical data

7.1 Voltage supply and current consumption

The following specifications include the values acc. to EN 61131-2.
Infeed U
L
Maximum voltage range allowed
Current consumption from U
Power consumption from U
Reverse voltage protection of the supply voltage
Fuse protection
Transient protection
Voltage dips at current supply interfaces
Electrical isolation and isolation of the voltage ranges
Profibus extension module
24 V supply with FE to XF8
8/37
Defective product due to gases jeopardizing
functions
S)). The product is not resistant against these gases.
2
Failure of the product due to overheating
chapter 10.2 "Installation notes" on page 16
0.120 kg
IP 20 acc. to DIN EN 60 529
L
L
Extension Modules Profibus, RT-
Ethernet, Sercos, CAN
24 V DC PELV/SELV (safety extra-low voltage)
18 V DC to 31.2 V DC (incl. all tolerances and rip-
ple)
0.2 A max.
4.8 W max.
Diode
Internal protective fuse, 4 A
Present, suppressor diodes
Up to 10 ms without impairment
845 V AC, 50 Hz, 1 min
DOK-CONTRL -XFE**EXTMOD-IT04-EN-P
)
2