Use Of The Safety Instructions; Structure Of The Safety Instructions; Explaining Signal Words And Safety Alert Symbol - Bosch Rexroth IndraControl XFE 01.1 Series Operating Instructions Manual

Bosch Rexroth AG

Use of the safety instructions

Safety instructions
●
3 Use of the safety instructions

3.1 Structure of the safety instructions

The safety instructions are structured as follows:
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Structure of the safety instructions

3.2 Explaining signal words and safety alert symbol

The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is used to draw attention to the safety instruction and also pro-
vides information on the severity of the hazard.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words danger,warning and caution is used to alert the reader to per-
sonal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
can occur.
4/37
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
Extension Modules Profibus, RT-
Ethernet, Sercos, CAN
Consequences and
source of danger
DOK-CONTRL -XFE**EXTMOD-IT04-EN-P