Bosch Rexroth AG
Spare parts, accessories and wear parts
The IndraControl extension modules can be used for complex connections to
controls that cannot be operated at the S20 bus, such as interface modules to
Profinet, Profibus, CAN and Sercos or Safety connection.
The IndraControl extension modules may only be operated under the mounting
and installation conditions, the position and the ambient conditions (tempera-
ture, degree of protection, humidity, EMC etc.) specified in this documentation.
5 Spare parts, accessories and wear parts
5.1 Connector 24 V
Ordering code
XA-CN01
Tab. 5-1: Connector, 24 V
5.2 Connector set for the CAN module
Ordering code
S20-CNS 2S-O/D/UI/E1/E2
Tab. 5-2: Connector set CAN module
5.3 Bus base module
Ordering code
XA-BS11
Tab. 5-3: Bus base module for extension bus
5.4 End clamp
Ordering code
SUP-M01-ENDHALTER
Tab. 5-4: End clamp
5.5 Wear parts
There are no wear parts in the extension modules.
6/37
Part number
Description
R911173741
24 V plug
Part number
Description
R911173804
Connector set for the 24 V module and the
CAN module
Part number
Description
R911173772
Bus base module for extension modules
Part number
Description
R911170685
2 pieces of snap-on end brackets for 35
mm NS 35/7.5 or NS 35/15 carrier plate;
width: 9.5 mm
Extension Modules Profibus, RT-
Ethernet, Sercos, CAN
DOK-CONTRL -XFE**EXTMOD-IT04-EN-P