Symbols Used; Signal Graphic Explanation On The Device; Intended Use - Bosch Rexroth IndraControl XFE 01.1 Series Operating Instructions Manual

Extension Modules Profibus, RT-
Ethernet, Sercos, CAN
CAUTION
In case of non-compliance with this safety instruction, minor or moderate injury
can occur.
NOTICE
In case of non-compliance with this safety instruction, material damage can oc-
cur.

3.3 Symbols used

Hints are represented as follows:
This is an information.
Tips are represented as follows:
This is a tip.

3.4 Signal graphic explanation on the device

krax

4 Intended use

NOTICE
The IndraControl extension modules may exclusively be used with the accesso-
ries and add-on components specified in this documentation. Components that
are not expressly mentioned must neither be attached nor connected. The same
applies to cables and lines.
Only to be operated with the component configurations and combinations ex-
pressly defined and with the software and firmware specified in the correspond-
ing functional description.
DOK-CONTRL -XFE**EXTMOD-IT04-EN-P
Prior to the installation and commissioning of the device, refer to the
device documentation.
Risk of damaging the device if not expressly sta-
ted accessories, mounting parts and other com-
ponents, cables, lines and software and firm-
ware are used.
Bosch Rexroth AG
Intended use
5/37