Siemens Solkor 7PG2113 Technical Manual page 86

7PG2113/4/5/6 Solkor Settings
All menus may be viewed without entering a password but actions will not be permitted if the relevant passwords
have been set.
The menus can be viewed via the LCD by pressing the access keys as below,
Figure 1.2 -2 Menu
Pressing CANCEL returns to the Identifier screen
This document describes the text descriptions as they appear in the menu structure when the relay is using the
default files. The user can programme the relay to use alternative text descriptions by installing user language
files through the Reydisp Evolution software language configuration tool – see 2.1.5
LCD Contrast
To change the contrast on the LCD insert a flat bladed screwdriver into the screwhead below the contrast symbol,
turning the screwhead left (anti-clockwase) lightens the contrast of the LCD and turning it right (clockwise)
darkens the display.
Figure 1.2-3 Fascia Contrast symbol
©2010 Siemens Protection Devices Limited Chapter 2 Page 4 of 21