3Com SuperStack II 10005622 Getting Started Manual page 32

3-6 C 3: C S
HAPTER ABLING
To cable the Console port:
Attach the female DB-9 cable connector to the
1
Console port's male connector and tighten the
retaining screws.
Attach the other end of the DB-9 cable to your
2
terminal.
Figure 3-3 shows the cabling of the Console port.
You can also access the system remotely through any
Ethernet port using telnet. See the SuperStack II
Switch 3900 and 9300 Administration Guide.
To use the Administration Console to configure the
system for management access through the Console
port, see Chapter 5.
3900 P
WITCH ORTS
1000 Base SX
Pckt
Stat
DB-9 connector
Serial cable
Figure 3-3 Cabling the Console Port
Console