Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference page 84

Verify Dynamic Bonding Group Configuration
Router# show cable modem 4800.33ee.ebee verbose | in DS Tuner
DS Tuner Capability : 32
Check the related RCC using the show cable mac-domain rcc command as shown in the following example:
Router# show cable mac-domain c3/0/1 rcc
RCC-ID
32
33
34
35
36
Check the dynamically created bonding groups using the show cable dynamic-bonding-group summary
command as shown in the following example:
Router# show cable dynamic-bonding-group summary
Dynamic bonding group: Enable
BG ID BG Name
RFid list
24834 Wi3/0/1:1 8
24832-24839
24836 Wi3/0/1:3 32
24832-24863
24835 Wi3/0/1:2 8
24840-24847
24837 Wi3/0/1:4 8
24856-24863
24838 Wi3/0/1:5 8
24848-24855
Table 21: Dynamic Bonding Group States
DBG State
CREATE_WAITING_SUP
HOLD
OPERATIONAL
RECLAIM_HOLD
RECLAIM_MODEM_MOVING
RECLAIM_WAITING_SUP
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
72
Cisco Remote PHY Shelf 7200 Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
RCP RCs MD-DS-SG
00 00 00 00 00 8 0
00 00 00 00 00 32 0
00 00 00 00 00 8 0
00 00 00 00 00 8 0
00 00 00 00 00 8 0
BG Size CMs ServFlows Create Time
11 11
6 6
7 7
7 7
7 7
CMs WB/RCC-TMPL
11 WB (Wi3/0/1:1)
6 WB (Wi3/0/1:3)
7 WB (Wi3/0/1:2)
7 WB (Wi3/0/1:4)
7 WB (Wi3/0/1:5)
Create Client
Sep 14 14:36:35.194 MODEM_ONLINE
Sep 14 14:43:24.144 MODEM_ONLINE
Sep 14 17:20:37.115 MODEM_ONLINE
Sep 14 17:21:37.723 STATIC_LOAD_BALANCE OPERATIONAL
Sep 14 17:21:39.761 STATIC_LOAD_BALANCE OPERATIONAL
Description
Line card sends a request to create DBG and waits
for SUP to create the bonding group.
DBG is created from SUP, or bonding group reverts
from reclaim to ready-for-use state.
If a modem is used on the bonding group after the
HOLD state times out, the DBG state changes to
OPERATIONAL.
Ready for reclaim.
If no modem is used on the bonding group or match
the reclaim in two minutes, the bonding group is
reclaimed. The DBG state changes to
RECLAIM_HOLD.
Ready for reclaim.
The modem is moved out of the bonding group.
Line card sends a DBG reclaim request and waits for
SUP to reclaim the BG.
D3.0 D3.1
Y Y
Y Y
Y Y
Y Y
Y Y
BG State
OPERATIONAL
OPERATIONAL
OPERATIONAL